The Calder Range is our premier range of boats. While still maintaining the bespoke levels of build our customers have come to expect these boats are equipped with only the highest quality systems and fittings allowing the customers to concentrate on the cosmetic details so we can provide the boat of their dreams.

50ft Traditional Hull Style Narrowboat
£78,684.00
57 or 58ft Traditional Hull Style Narrowboat
£88,968.00

50ft Barge Style Narrowboat
£76,685.00
57 or 58ft Barge Style Narrowboat
£86,969.00

50ft x 10ft Broad Beam Barge £105,122.00
57ft x 10ft Broad Beam Barge £118,898.00

50ft x 11ft Broad Beam Barge £106,590.00
57ft x 11ft Broad Beam Barge £119,780.00

50ft x 12ft Broad Beam Barge £112,465.00
57ft x 12ft Broad Beam Barge £125,655.00

50ft x 13ft Broad Beam Barge £119,515.38
57ft x 13ft Broad Beam Barge £132,705.63

50ft x 14ft Broad Beam Barge £128,915.38
57ft x 14ft Broad Beam Barge £142,105.63

Including VAT/delivery and Launch at Ledgard Wharf
We can build to any length over 45ft prices available upon request.

HULL SPECIFICATION

Full conformity to RCD cat D & BSS built to CBA code of practice guide lines.
Your choice of Trad, Modified Trad, Semi Trad, Cruiser or Barge Style. (We do not charge extra for different styles!)

STEEL
Oiled de-scaled BS EN10025 steel. This steel remains rust and scale free from flat plate to completed hull.
WELDING
The Base plate is stick welded and conventional MIG welding is used elsewhere throughout the hull. All welds are dye pen tested.
BASE PLATE
10 mm. boats under 10ft beam 15 mm over 10ft beam.
SIDES
6 mm.
CABIN SIDES
5 mm.
ROOF
4 mm boats under 10ft beam and 5 mm over 10ft beam. Roofs bars are 25 mm box section under 10ft beam and 30 mm over 10ft beam with minimum curve. (Our roofs do not bend or rely on a large curve for rigidity.)
STRINGERS
55 x 55 x 5 mm.
FLOOR BEARERS
77 x 77 x 5 mm.
BOW LOCKERS
Fitted as standard with steel hinged lids.
CABIN DOORS
4 mm folded steel doors front and rear. (Not flat plate!)
SIDE HATCH (1 side hatch is included to meet safety regulations)
4 mm folded steel doors front and rear. (Not flat plate!)
SAFETY RAILS
Cruiser and modified trad equipped with steel safety rails with timber tops.
FUEL TANK
Integral split tank to maximum size dictated by design with environmental anti spill traps. Split tank to cater for alternate fuel for heating/generator purposes.
GAS LOCKER
Self draining vented locker(s) to suit design.
WEED HATCH
Quick release easy access design with independent deck hatch access if design requires.
DECK FITTINGS
T stud or bollards forward, pole and plank rack, roof eye and stern bollards.
FENDER EYES
Brass recessed.
DECKS
All self draining. All deck hatches with self draining frames.
RUBBING STRAKES
50 mm x 12 mm One full top, One full mid stake and One bow strake.
HAND RAILS AND DECK RAILS
Integral folded roof section with drain scuppers. (Not angle section) or Tubular rails to suit design and customer requirements.
ENGINE BED
Fully welded anti flex bearers to suit engine.
ENGINE COOLING
Skin tank to match engine or customers requirements.
STERN TUBE & SHAFT
To match engine requirements with R&D coupling and brass quick release greaser bilge and automatic Johnson pump.
STEERING
Nylon anti seize rudder bearings.
Solid forged swan neck. (Not bent tube)
ANODES
4 x 1.5 Kg magnesium.
BALLAST
The floor is painted with Mainline Blacking to spray foam level, and new concrete flags are then laid on roofing felt.

HULL FINISH
INSULATION
Fully polyurethane spray foamed.
WINDOWS
8 x High quality Wesley marine windows in customer's choice of porthole or radius corner top hoppers in a choice of finishes installed to customers design. (Double glazed or alternative styles including traditional brass portholes available at extra cost.)
10 x windows on boats over 59ft.
VENTILATION
5 x Brass mushroom vents or 5 x Brass or Stainless Steel UFO vents. Brass or Stainless steel door/bulkhead vents.
PAINT
Underwater paintwork system - Hull blacked to gunnels with International Mainline Blacking.
Upperworks paintwork system - All work carried out by Stuart Atkinson boat painter to commercial vehicle standards.
The hull is fully prepared by Stuart prior to being sprayed with three coats of QD Xylene Highbond primer/undercoat when dry this is flatted back and three coats of Delfleet 2 pack high gloss commercial vehicle paint are applied. When fully hardened this is machine polished to give a very high quality finish.
CHOICE OF COLOURS
Any choice of colour from the British Standard or RAL Standard colours charts (Approximately 400 choices!)
FENDERS AND FITTINGS
Brass or Chrome recessed fender eyes.
Full set of bow, stern and side fenders.
Boat Hook.
Life Ring
Brass tiller tube handle and pin.
Stained and painted boarding plank.
Anchor and chain.

ENGINE
Narrowboats under 57ft choice of Beta Marine Green line 38hp or Barrus Shire 40hp.
Boats 57ft and over choice of Beta Marine Green line 42hp or Barrus Shire 45hp.
10ft Broad beams choice of Beta Marine or Barrus Shire 50hp.
12ft Broad beams choice of Beta Marine 62hp or Barrus Shire 65hp.
Both choice of manufactures engines are equipped with deluxe control panels.
2 years warranty.

PLUMBING
WATER TANK
Food Grade Stainless Steel to maximum size to match design (125 gallon minimum).
PIPING
Hep²O Professional Flexible Plumbing System for Hot & Cold & Central Heating System.
CALORIFIER
Twin coil 55 litre Sure-cal with 1Kw immersion heater.
WATER FILTER
Inline high capacity carbon de-taint water filter.
WATER PUMP
12.5 litre per min automatic 4405 Series Flojet.
DECK FITTINGS
Brass or chrome to suit.

ELECTRICAL SYSTEMS
Electrical system meets the standards laid down by the RCD, BMEA and BSS.

240V AC SYSTEM
Mastervolt power system comprising of Mass Combi 2 kw inverter/100 amp charger, Master Link MICC (Digital remote control panel combining a large number of functions including, Ah counting and time remaining for domestic battery bank)and Masterswitch 0 for fully automatic control of power source.
240V 3.5KW Engine driven Electrolux Travel pack generator, Supplying system through independent consumer unit. (Giving complete freedom from shore side power.)
Landline input to custom made AC control panel supplied by GS Controls.
Equipped with-
Mains present indicator.
Correct polarity indicator.
AC Voltage Meter.
RCB
1 x 10 A MCB protected circuit.
2 x 16A MCB protected circuit.
Galvanic isolator with meter.
All AC internal cabling run in 2.5mm² Arctic cable.
SOCKETS
Choice of 6 X double Brass, Chrome or brushed stainless double sockets.
2 x White single sockets located in TV unit and Fridge space.
12V DC SYSTEM
All low voltage cabling used complies to Bs6862, Bs6360
Twin engine alternators-
Beta Marine engine starter 45A domestic 95A.
Barrus Shire engine starter 50A domestic 110A.
1 x 110 Squadron AGM3 Maintenance free starter battery. (3 years warranty.)
4 x 110 Squadron AGM3 Maintenance domestic bank batteries. (3 years warranty.)
Heavy duty easy access starter, domestic bank and inverter isolators.
Blue Sea Systems 12V distribution panel.
Equipped with-
12V Meter.
10 x individually thermal breaker protected circuits.
LIGHTING
Choice of 12 x halogen down lighters from the standard Cantalupi lighting range with conventional domestic switching with switch plate to match choice of sockets.
3 x Blue Emergency/Nightlight roof mounted LED's.
TV AERIAL
Matching outlet and cabling to outside socket or aerial if fitted.
EXTERNAL
Head lamp
Horn

LPG
The LPG systems are tested by a CORGI Boat qualified fitter. (We do not OEM self certificate.)
2 x 13 KG bottles with manual changeover.
Gas bottles are supplied with boat.

CENTRAL HEATING
Eberspacher Hydronic 10 with programmer running 3 radiators and an heated towel rail in bathroom. (Other options are available at extra cost.)
System is equipped with a twin coil calorifier with 1KW immersion heater. This system provides for 3 independent sources of hot water: Engine, Electricity and Central heating system.

FIT OUT

The fit out will largely remain down to the individual customers choice. We have no fixed layout and are happy to work with the customer to provide a layout to suit.

FLOOR
3/4” Exterior grade plywood. (Not shuttering ply.)
LINING
Choice of 9mm Ash or Oak veneered ply with matching trim or 8mm Kronospan in a large choice of colours or finishes.
All trim is screwed and plugged or nailed and filled by hand, we do not use nail guns, no nails or cups and screws.
All doors are hardwood edged we do not believe in the routed MDF edge effect.
GALLEY
Choice of traditional cabinet made or domestic kitchen units to your own layout with overhead cupboard. (Traditional narrowboat designs normally feature cabinet made units while barge styles and broad beams normally favour domestic units.)
APPLIANCES
New World full size 4 ring Stainless hob.
New World Full size Stainless oven.
240 “A” rated fridge
240 “A” rated freezer
Indesit Washing machine 1000 Spin 5kg “A” rated
SALOON
Open plan with Corner TV unit fitted with Radio/CD player and four speakers.
Or additional extra option to build in entertainment system comprising of LCD TV and RADIO/CD/DVD/MP3 player.
Shelving.
BATHROOM
Full size domestic glass corner shower enclosure (Barge styles) with thermostatic mixer unit and resin stone tray. Waste water pumped overboard via a Whale Gulper 220. The shower is lined with your choice of Formica from an extensive range. (We do not recommend the use of tiles on boats.)
Vanity unit with ceramic basin and monoblock tap and mirror.
Extractor fan.
Tecma electric Macerator toilet emptying to maximum tank size to fit.
BEDROOM
Permanent double with overhead cupboard with down lighters. And wardrobes to suit design.
FLOORING
Choice from commercial grade carpet and/or choice of laminate flooring. (Other options including solid oak planking are available at extra cost.)
CURTAINS/BLINDS
Choice of Curtains on brass or timber rails or roller blinds through out the boat.
FIRE FIGHTING EQUIPMENT
Smoke detector
3x 2Kg dry powder extinguishers.
1x Fire blanket.


DOCUMENTATION

Certificate of conformity to Cat D of the R.C.D..
Full owners Manual and diagrams.

The Hebble Range is our bespoke level of build that our customers have come to expect. These boats are equipped with ever thing needed to get you comfortably on to the water. Those owners wishing to use their boats for residential or more extended use can easily tailor this specification to meet their needs.

50ft Traditional Hull Style Narrowboat
£69,850.00
57ft or 58ft Traditional Hull Style Narrowboat £79,463.00

50ft Barge Style Narrowboat
£67,850.00
57ft or 58ft Barge Style Narrowboat
£77,463.00

50ft x 10ft Broad Beam Barge £97,812.00
57ft x 10ft Broad Beam Barge £111,589.00

50ft x 11ft Broad Beam Barge £99,290.00
57ft x 11ft Broad Beam Barge £112,470.00

50ft x 12ft Broad Beam Barge £105,165.00
57ft x 12ft Broad Beam Barge £118,345.00

50ft x 13ft Broad Beam Barge £112,215.00
57ft x 13ft Broad Beam Barge £125,395.00

50ft x 14ft Broad Beam Barge £121,615.00
57ft x 14ft Broad Beam Barge £134,795.00

Including VAT/delivery and Launch at Ledgard Wharf
We can build to any length over 45ft prices available upon request.

HULL SPECIFICATION

Full conformity to RCD cat D & BSS built to CBA code of practice guide lines.
Your choice of Trad, Modified Trad, Semi Trad, Cruiser or Barge Style. (We do not charge extra for different styles!)

STEEL
Oiled de-scaled BS EN10025 steel. This steel remains rust and scale free from flat plate to completed hull.
WELDING
The Base plate is stick welded and conventional MIG welding is used elsewhere throughout the hull. All welds are dye pen tested.
BASE PLATE
10 mm. boats under 10ft beam 15 mm over 10ft beam.
SIDES
6 mm.
CABIN SIDES
5 mm.
ROOF
4 mm boats under 10ft beam and 5 mm over 10ft beam. Roofs bars are 25 mm box section under 10ft beam and 30 mm over 10ft beam with minimum curve. (Our roofs do not bend or rely on a large curve for rigidity.)
STRINGERS
55 x 55 x 5 mm.
FLOOR BEARERS
77 x 77 x 5 mm.
BOW LOCKERS
Fitted as standard with steel hinged lids.
CABIN DOORS
4 mm folded steel doors front and rear. (Not flat plate!)
SIDE HATCH (1 side hatch is included to meet safety regulations)
4 mm folded steel doors front and rear. (Not flat plate!)
SAFETY RAILS
Cruiser and modified trad equipped with steel safety rails with timber tops.
FUEL TANK
Integral split tank to maximum size dictated by design with environmental anti spill traps. Split tank to cater for alternate fuel for heating/generator purposes.
GAS LOCKER
Self draining vented locker(s) to suit design.
WEED HATCH
Quick release easy access design with independent deck hatch access if design requires.
DECK FITTINGS
T stud or bollards forward, pole and plank rack, roof eye and stern bollards.
FENDER EYES
Brass recessed.
DECKS
All self draining. All deck hatches with self draining frames.
RUBBING STRAKES
50 mm x 12 mm One full top, One full mid stake and One bow strake.
HAND RAILS AND DECK RAILS
Integral folded roof section with drain scuppers. (Not angle section) or Tubular rails to suit design and customer requirements.
ENGINE BED
Fully welded anti flex bearers to suit engine.
ENGINE COOLING
Skin tank to match engine or customers requirements.
STERN TUBE & SHAFT
To match engine requirements with R&D coupling and brass quick release greaser bilge and automatic Johnson pump.
STEERING
Nylon anti seize rudder bearings.
Solid forged swan neck. (Not bent tube)
ANNODES
4 x 1.5 Kg magnesium.
BALLAST
The floor is painted with MAINLINE to spray foam level, and new concrete flags are then laid on roofing felt.

HULL FINISH
INSULATION
Fully polyurethane spray foamed.
WINDOWS
8 x High quality Wesley marine windows in customer's choice of porthole or radius corner top hoppers in a choice of finishes installed to customers design. (Double glazed or alternative styles including traditional brass portholes available at extra cost.)
10 x windows on boats over 59ft.
VENTILATION
5 x Brass mushroom vents or 5 x Brass or Stainless Steel UFO vents. Brass or Stainless steel door/bulkhead vents.
PAINT
Underwater paintwork system - Hull blacked to gunnels with MAINLINE Blacking.
Upperworks paintwork system - All work carried out by Stuart Atkinson boat painter to commercial vehicle standards.
The hull is fully prepared by Stuart prior to being sprayed with three coats of QD Xylene Highbond primer/undercoat when dry this is flatted back and three coats of Delfleet 2 pack high gloss commercial vehicle paint are applied. When fully hardened this is machine polished to give a very high quality finish.
CHOICE OF COLOURS
Any choice of colour from the British Standard or RAL Standard colours charts (Approximately 400 choices!)
FENDERS AND FITTINGS
Brass or Chrome recessed fender eyes.
Full set of bow, stern and side fenders.
Boat Hook.
Life Ring
Brass tiller tube handle and pin.
Stained and painted boarding plank.
Anchor and chain.

ENGINE
Narrowboats under 57ft choice of Beta Marine Green line 38hp or Barrus Shire 40hp.
Boats 57ft and over choice of Beta Marine Green line 42hp or Barrus Shire 45hp.
10ft Broad beams choice of Beta Marine or Barrus Shire 50hp.
12ft Broad beams choice of Beta Marine 62hp or Barrus Shire 65hp.
Both choice of manufactures engines are equipped with deluxe control panels.
2 years warranty.

PLUMBING
WATER TANK
Food Grade Stainless Steel to maximum size to match design (125 gallon minimum).
PIPING
Hep²O Professional Flexible Plumbing System for Hot & Cold & Central Heating System.
CALORIFIER
Twin coil 55 litre Sure-cal with 1Kw immersion heater.
WATER FILTER
Inline high capacity carbon de-taint water filter.
WATER PUMP
12.5 litre per min automatic 4405 Series Flojet.
DECK FITTINGS
Brass or chrome to suit.

ELECTRICAL SYSTEMS
Electrical system meets the standards laid down by the RCD, BMEA and BSS.

240V AC SYSTEM
Victron Phonix Multiplus compact 1600w Inverter/60Amp Charger.
Landline input to custom made AC control panel supplied by GS Controls.
Equipped with-
Mains present indicator.
Correct polarity indicator.
AC Voltage Meter.
RCB
1 x 10 A MCB protected circuit.
2 x 16A MCB protected circuit.
All AC internal cabling run in 2.5mm² Arctic cable.
SOCKETS
Choice of 4 X double Brass, Chrome or brushed stainless double sockets.
1 x White single sockets located in TV unit and Fridge space.
12V DC SYSTEM
All low voltage cabling used complies to Bs6862, Bs6360
Twin engine alternators-
Beta Marine engine starter 45A domestic 95A.
Barrus Shire engine starter 50A domestic 110A.
1 x 110 Squadron AGM3 Maintenance free starter battery. (3 years warranty.)
2 x 110 Squadron AGM3 Maintenance domestic bank batteries. (3 years warranty.)
Heavy duty easy access starter, domestic bank and inverter isolators.
Blue Sea Systems 12V distribution panel.
Equipped with-
12V Meter.
10 x individually thermal breaker protected circuits.
LIGHTING
Choice of 10 x halogen down lighters from the standard Cantalupi lighting range with conventional domestic switching with switch plate to match choice of sockets.
EXTERNAL
Head lamp
Horn

LPG
The LPG systems are tested by a CORGI Boat qualified fitter. (We do not OEM self certificate.)
2 x 13 KG bottles with manual changeover.
Gas bottles are supplied with boat.

CENTRAL HEATING
Eberspacher Hydronic 5 on narrowboats Hydronic 10 on broad beams with programmer running 3 radiators.
System is equipped with a twin coil calorifier with 1KW immersion heater. This system provides for 3 independent sources of hot water: Engine, Electricity and Central heating system.

FIT OUT
The fit out will largely remain down to the individual customers choice. We have no fixed layout and are happy to work with the customer to provide a layout to suit.

FLOOR
3/4” Exterior grade plywood. (Not shuttering ply.)
LINING
Choice of 9mm Ash or Oak veneered ply with matching trim or 8mm Kronospan in a large choice of colours or finishes.
All trim is screwed and plugged or nailed and filled by hand, we do not use nail guns, no nails or cups and screws.
All doors are hardwood edged we do not believe in the routed MDF edge effect.
GALLEY
Choice of traditional cabinet made or domestic kitchen units to your own layout with overhead cupboard. (Traditional narrowboat designs normally feature cabinet made units while barge styles and broad beams normally favour domestic units.)
APPLIANCES.
Spinflo Capprice 2020 cooker in stainless steel.
240 “A” rated fridge with ice box.
SALOON
Open plan with Corner TV unit.
Or additional extra option to build in entertainment system comprising of LCD TV and RADIO/CD/DVD/MP3 player.
Shelving.
BATHROOM
Corner shower unit. Waste water pumped overboard via a Whale Gulper 220. The shower is lined with your choice of Formica from an extensive range. (We do not recommend the use of tiles on boats.)
Vanity unit with ceramic basin and monoblock tap and mirror.
Tecma electric Macerator toilet emptying to maximum tank size to fit.
BEDROOM
Permanent double with overhead cupboard with down lighters. And wardrobes to suit design.
FLOORING
Choice from commercial grade carpet and laminate flooring. (Other options including solid oak planking are available at extra cost.)
BLINDS
Choice of roller blinds through out the boat.
FIRE FIGHTING EQUIPMENT
Smoke detector
3x 2Kg dry powder extinguishers.
1x Fire blanket.

DOCUMENTATION

Certificate of conformity to Cat D of the R.C.D..
Full owners Manual and diagrams.

OTHER OPTIONS

Addition of wheelhouse to broad beam boats. including hydraulic steering (£1250.00).
£9150.00
Rudder Position indicator
£526.90
Water,fuel & waste level indicators and senders.
£570.00
Addition of well deck to barge style hull.
£590.00
Stern lockers.
£350.00
Full rubber D fender on broad beams.
£1280.75
Bow thruster tube Narrow.
£453.00 (£53.00 refundable on blanking plate.)
Bow thruster tube Broad.
£483.00 (£53.00 refundable on blanking plate.)
Nobels Electric 9hp bow thruster and tube fitted Narrow.
£3700.00
Nobels Electric 9hp bow thruster and tube fitted Broad.
£3780.00
Extra side hatch.
£475.00
Side hatch roof hatch.
£350.00
Front door windows.
£195.00
Stable style front doors.
£240.00
Houdini Hatch. (Manufactured by Houdini and not the horse box type!)
£650.00
Side hatch fly screen
£190.00
Side hatch perspex panel
£230.00
Cratch and cover.
£1400.00
Navigation lights.
£300.00
2 Colour paint option.
£450.00
Upgrade to Eberspacher Hydronic 10.
£300.00
Upgrade to 9.5Kw Hurricane water heater.
945.00
Squirrel solid fuel stove and tiled hearth.
Fitted
£900.00
Dinette convertible to double bed.
£1200.00
Bed extension on trad types
£500.00
Hard wood T&G roof lining £1600.00
Hard Wood T&G cabin sides £3100.00
Upgrade from TV corner unit to under gunwale mounted Audio Video system featuring 20” Sharp LCD TV and FM/CD/MP3/DVD player £1100.00
CD/Radio and two speakers £150.00
CD/DAB Radio and two speakers £210.00
CD/DVD/MP3 Radio with remote control and two speakers £350.00
Extra set of speakers £30.00
Colour bow camera and 7”TFT monitor.
£920.00

Mastervolt Power system 1upgrade on Hebble range.
Mastervolt Mass Combi 2 KW Inverter/100 Amp Charger.
80 amp Charger
Inverter/Charger Monitor
Masterswitch
Fully fitted.
£2625.00

Upgrade to Victron Phoenix 2.5kw/120amp Combi inverter charger and monitor upgrade on Hebble range.
Fitted
£1500.00

Electrolux 3.5kva engine mounted 240 AC generator upgrade on Hebble range
Fitted
£2550.00

Prices include VAT at 17.5%

Prices remain valid until 30th September 2006
We reserve the right to alter our specification and design without prior notice.